北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
5. Install the bulb socket by turning it
clockwise.
6. Reconnect the electrical connector.
7. Reinstall the trunk trim lining.
! Outback
s11be0602
1. Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
2. Turn the bulb socket counterclockwise
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise.
5. Install the light cover on the rear gate.
& Dome Light
s11be08
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
– CONTINUED –
Replacing Bulbs
523
11
Maintenance and Service
To Next Page
Loading...
