北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
& Replacing Battery of Access
Key Fob
s11bk01
CAUTION
. When removing or fitting the
access key fob cover, make sure
that the plastic part does not
come off or become misaligned.
. Before replacing the battery, re-
move any static electricity.
Battery: Button battery CR2032 or
equivalent
1) Release button
2) Emergency key
1. Take out the emergency key.
2. Wrap a flat-head screwdriver with vinyl
tape or a cloth, and insert it in the gap to
remove the cover.
3. Take out the battery using a flat-head
screwdriver with vinyl tape or a cloth.
4. Insert a new battery with its positive (+)
side facing upward as shown in the figure.
5. Attach the cover to the access key fob
by fitting the projections and recesses
together.
Replacing Battery
526
To Next Page
Loading...
