Subaru Outback 2021 - Replacing Battery of Transmitter

(529,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
& Replacing Battery of Trans-
mitter
s11bk02
CAUTION
Before replacing the battery, remove
any static electricity.
Battery: Button battery CR1620 or
equivalent
1. Open the key head using a flat-head
screwdriver.
2. Remove the transmitter case from the
key head.
3. Open the transmitter case by releasing
the hooks.
1) Negative (−) side facing up
4. Replace the old battery with a new
battery (type CR1620 or equivalent) mak-
ing sure to install the new battery with the
negative (−) side facing up.
5. Put together the transmitter case by
fitting the hooks on the case.
6. Reinstall the transmitter case in the
key head.
7. Refit the removed half of the key head.
After the battery is replaced, the trans-
mitter must be synchronized with the
remote keyless entry system’s control
unit. Press either the “
” or “ ” button
six times to synchronize the unit.
Replacing Battery
527
11
Maintenance and Service