Subaru Outback 2021 - Page 200

(196,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
Inside warning
chime
Outside warning
chime
Operation indica-
tor on push-button
ignition switch
Status Action
Ding — —
Access key warning for engine start:
The push-button ignition switch is pressed
while the access key fob is not inside the
vehicle.
Carry the access key fob, and press the
push-button ignition switch.
Ding
Beep, beep,
beep (3 times)
—
Access key takeout warning:
The driver exits the vehicle with the access
key fob and closes the driver’s door while the
push-button ignition switch is in a position
other than “OFF” and the select lever is in the
“P” position.
Switch the push-button ignition switch to
“OFF”, and get out of the vehicle.
Ding
Beep, beep,
beep (3 times)
—
Passenger access key takeout warning:
A fellow passenger exits the vehicle with the
access key fob and closes a door other than
the driver’s door while the push-button
ignition switch is in a position other than
“OFF”.
Return the access key fob to inside the
vehicle, or switch the push-button ignition
switch to “OFF”.
Long beep
(continuous)
Long beep
(continuous)
—
Access key takeout without “P” position
warning:
The driver exits the vehicle with the access
key fob and closes the driver’s door while the
push-button ignition switch is in a position
other than “OFF” and the select lever is in a
position other than the “P” position.
Shift the select lever to the “P” position,
switch the push-button ignition switch to
“OFF” and exit the vehicle.
Long beep
(continuous)
— —
Select lever position warning:
. Case 1: The engine is turned off by
pressing the push-button ignition switch
while the select lever is in a position other
than the “P” position.
. Case 2: The driver’s door is opened
while the push-button ignition switch is in
a position other than “OFF” and the
select lever is in a position other than the
“P” position.
. Case 1: Start the engine, shift the select
lever to the “P” position, switch the push-
button ignition switch to “OFF” and exit
the vehicle.
. Case 2: Shift the select lever to the “P”
position, switch the push-button ignition
switch to “OFF” and exit the vehicle.
Warning and Indicator Lights
194