北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
1) When reversing
2) When either strong automatic braking or
torque control is applied to prevent
collision (in this case, short warning
beeps or continuous warning beeps will
sound)
3) When the vehicle is stopped by the
system (in this case, the continuous
beep will remain sounding)
4) Object (e.g., a wall)
WARNING
If your vehicle is trapped on a rail-
road crossing and you are trying to
escape by reversing through the
crossing gate, the system may re-
cognize the crossing gate as an
obstacle and brake may activate. In
this case, remain calm and either
continue to depress the accelerator
pedal or cancel the system. To
cancel the system, refer to “Cancel-
ing the Reverse Automatic Braking
(RAB) System Operation” FP402.
– CONTINUED –
Reverse Automatic Braking (RAB) System
395
7
Starting and Operating
To Next Page
Loading...
