7.7 COOLING AND LUBRICATION SYSTEM (CONTINUED)
Key Description Part Number Note Quantity
1 motor, fan 1hp 4p teee – (I) 1
2 fan, cooling p8 16" –– (I) 1
3 strip,weather 1" x 1/8" foam (ft) 02250058–345 7
4 support, motor fan 1800/2200 02250154–721 1
5 cooler,air/oil es8 15–25hp 02250154–741 1
6 venturi,es8 16" 02250156–639 1
7 louver,extruded 18kw 500.0 lng 02250160–429 4
8 guard, fan discharge p8 p10 02250160–452 1
9 duct,centrifugal fan p8 p10 02250160–536 1
10 panel, venturi p8/p10 02250160–543 1
11 support,airoc p8 p10 02250160–566 2
12 insulation,foam acous louver p8 p10 02250162–492 4
13 grip,cord for so 12/4 st 3/4" 250018–497 2
14 wire, neoprene #12–4 so (ft) 850604–012 8
15 washer, metric–iso7089– 8 865408–170 4
16 washer, iso 7093–8–140hv 865708–240 3
17 nut,serr flng m8 x 1.25 882508–125 4
18 screw, hex serr washer m8 x 16 882608–016 8
19 screw, hex serr washer m8 x 30 882608–030 4
20 screw, tf–hex m8 x 16 blk zinc 883008–016 22
21 screw, plastic pilot m6 x 30 883306–030 16
22 nut,hex locking m8 884708–125 4
A1 To starter box
A2 Venturi mounting holes for use with 50Hz fan
A3 Venturi mounting holes for use with 60Hz fan
A4 Place weather stripping on cooler mounting face to eliminate air leakage
(I) This part may vary per machine specification. Consult the Sullair factory for details.
PARTS LISTS
®SULLAIR®
1100e, 1500e, 1800e Operator’s Manual and Parts List
61
To Next Page
Loading...
