Sullair 125 - Page 49

Section 7
ILLUSTRATIONS AND PARTS
43
7.3A ENGINE, COMPRESSOR AND PARTS - PERKINS AND CATERPILLAR MODELS 125, 130 AND 185
key part
number description number quantity
1 rod, threaded speed control 1/4-28 02250064-593 1
2 spacer, brake lever 250p 02250064-594 1
3 adapter, sae #4 to 10 series 02250071-119 1
4 elbow, 90 3/8”tube x 1/8”npt m 02250099-622 1
5 spring, extension .31 x 7.5#/in 02250112-337 1
6 washer, snubbing vibration mount 02250125-471 6
7 mount, vibration isolator 185 02250125-472 4
8 support, engine front ca 185dpq 60hp 02250136-993 2
9 coupling, assy ktr 185dpq 60hp 02250138-058 1
10 tee, male branch 3/8”tube x 1/8”npt 02250138-698 1
11 switch, engine sht dwn 230 185 60hp 02250139-887 1
12 capscrew, hex met fine m14-1.5x30 02250139-888 8
13 support, fuel fltr perkins 185q 02250139-916 1
14 valve, check 1/8 female - male 02250142-248 1
15 support,spd ctl 185dpq pe 60hp 02250143-546 1
16 fan, 18” blower 185 pe/cat 02250147-425 1
17 spacer, fan 1.50 185 cat 02250148-573 1
18 joint, ball female 1/4” l.h. 250011-578 1
19 joint, ball female 1/4” r.h. 250011-597 1
20 cylinder, speed 3/4 x 1 stroke 250024-272 1
21 clamp, hose 5/8” i.d. 408300-005 2
22 clamp, hose 1 13/16” i.d. 408300-009 1
23 key, square cl2 3/8” x 1 1/2 821206-150 1
24 nut, hex locking 1/4-20 825504-145 2
25 nut, hex locking 1/2-13 825508-262 2
26 capscrew, hex 8.8 m6 x 65mm 828006-065 4
27 capscrew, hex 8.8 m12 x 75mm 828012-075 2
28 capscrew, hex gr5 3/8-16 x 1 1/4 829106-125 19
29 capscrew, hex gr5 1/2-13 x 3 1/4 829108-325 2
30 screw, socket iso 4762 m10 x 20mm 829310-020 8
31 washer, spr lock reg pltd 3/8 837806-094 12
32 washer, pl-b reg pltd 1/2 838208-112 2
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
Continued on page 45