Section 7
ILLUSTRATIONS AND PARTS
53
7.3C ENGINE, COMPRESSOR AND PARTS - JOHN DEERE MODEL 160H (CONTINUED)
key part
number description number quantity
33 capscrew, hex 8.8 m10 x 35mm 828010-035 12
34 capscrew, hex 8.8 m12 x 75mm 828012-075 2
35 capscrew, hex 8.8 m16 x 35mm 828016-035 4
36 capscrew, socket hd 3/8-16 x 3/4 828306-075 8
37 capscrew, hex gr5 1/4-20 x 1 829104-100 1
38 capscrew,hex gr5 3/8-16 x 1 1/4 829106-125 8
39 capscrew,hex gr5 1/2-13 x 3 829108-300 2
40 washer, pl-b reg pltd 5/16 838205-071 3
41 washer, pl-b reg pltd 1/2 838208-112 2
42 washer, spr lock-metric pltd m8 838808-200 6
43 washer, spr lock-metric pltd m10 838810-220 12
44 hose, heater 5/8 842115-062 1 ft.
45 nut, hex jam lh pltd 1/4-28 866604-164 1
46 capscrew, ferry head hd pltd 1/4-20 x 1 1/2 867304-150 2
47 nut, hex jam rh pltd 1/4-28 868204-164 1
48 washer, nord-lock pl 5/8” 878610-100 4
49 engine, jd 4024t 66hp 160h (I) 1
50 compressor & part, dxx102147e (I) 1
(I) Consult factory with serial number to determine part number.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
