Sullair 185 CFM - John Deere Model 160 H

Section 7
ILLUSTRATIONS AND PARTS
75
7.8A REGULATOR VALVE/BLOWDOWN VALVE ASSEMBLY - ALL MODELS EXCEPT JOHN DEERE 160H
key part
number description number quantity
1 elbow, 90d 5/16” tube x 1/4”npt 02250081-218 1
2 elbow, 90 3/8”tube x 1/4”npt m 02250099-626 1
3 connector, 3/8tube x 1/2npt 02250129-957 1
4 manifold, regulator blowdown 185 (I) 02250146-046 1
5 connector, 3/8 tube x 1/4npt 02250148-188 2
6 support, manifold reg. bd 185q 02250148-190 1
7 elbow, 90 1/4t pls x 1/4 npt m 250018-430 1
8 screw, hex ser washer 3/8-16 x 1/2 829706-050 2
9 washer, pl-b reg pltd 3/8 838206-071 2
10 nipple, pipe-hex 1/4 x 1/4 860404-025 1
11 tee, pipe 150# plt 1/4 866815-010 1
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
7.8B REGULATOR VALVE/BLOWDOWN VALVE ASSEMBLY - JOHN DEERE MODEL 160H
key part
number description number quantity
1 elbow, 90d 5/16” tube x 1/4”npt 02250081-218 1
2 elbow, 90 3/8”tube x 1/4”npt m 02250099-626 1
3 connector, 3/8 tube x 1/4npt 02250148-188 4
4 elbow, 90 1/4t pls x 1/4 npt m 250018-430 1
5 screw, hex ser washer 3/8-16 x 1/2 829706-050 2
6 washer, pl-b reg pltd 3/8 838206-071 2
7 nipple, pipe-hex 1/4 x 1/4 860404-025 3
8 tee, pipe 150# plt 1/4 866815-010 2
9 bushing, red pltd 1/2 x 1/4 867102-010 1
10 support, manifold reg. bd 185q 02250148-190 1
11 valve, pressure regulator (II) 250017-280 1
12 manifold, press reg/bd 150psi 185h 02250151-201 1
(I) For maintenance on regulator blowdown manifold no. 02250146-046, order repair kit no. 02250147-
737.
(II) For maintenance on pressure regulator no. 041517, order repair kit no. 041742.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR