185 T3 Kubota User Manual 3: Specifications
02250223-054 R01
Subject to EAR, ECCN EAR99 and related export control restrictions. 31
3.4 Application guide
Sullair portable air compressors are filled with Sullair
AWF
®
. Sullair AWF is a heavy-duty, multi-viscosity, all-
weather fluid suitable to a wide variety of conditions,
including conditions that can cause severe fluid oxida-
tion.
In high ambient temperature and high humidity condi-
tions, condensed moisture can emulsify with
the fluid
(indicated by the fluid turning a “milky” color). Change the
fluid if this condition develops.
Do not mix dif
ferent types or brands of fluid. Mixing dif-
ferent types or brands of fluids can lead to operational
prob
lems such as foaming, plugged filters, blocked ori-
fices or lines, or even severe problems like a plugged
cooler
or a locked air end.
Contact your Sullair representative for fluid recommenda-
tions if operating conditions require the use of an
extend
ed life fluid (for example, the ambient temperature
is outside the recommended temperature range for Sul-
lair AWF).
Sullair encourages users to participate in a fluid analysis
prog
ram. The analysis might indicate a need for change
intervals different from those recommended in this man-
ual (for example, to maximize the life of the machine in
d
irty environm
ents). Contact your Sullair representative
for details.
NOTE
Proper compressor fluid level visible halfway in
fluid sight glass when checked on a level surface
with the compressor not running.
Figure 3-1: Receiver tank
1. Receiver/tank
2. Sight glass
3. Fluid fill port
To Next Page
Loading...
