Sullair 185 T3 Kubota - Page 55

185 T3 Kubota User Manual 6: Noise Control
02250223-054 R01
Subject to EAR, ECCN EAR99 and related export control restrictions. 51
Table 6-3: Annual engine vibration mount inspection
At least annually inspect engine vibration mounts for security of attachment and to make sure the resilient parts are intact. Do
not operate compressor with defective engine mounting system. Remove and replace defective parts by ordering with part
numbers indicated in Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Table 6-4: Annual frame, canopy and parts inspection
At least annually inspect frame, canopy and parts, for security of attachment. Make sure there are not any missing or
deformed members, including all hinged doors, covers and their fastening devices. Do not operate compressor with defective
frame, canopy and parts. Remove and replace defective parts by ordering with part numbers indicated in Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date: