Sullair 375H - Accessing Stored Trouble Codes

300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00 SECTION 2
34
ACCESSING STORED TROUBLE CODES
1. Turn the switch to the ON position. Starting
at the single or four engine parameter dis-
play, press the MENU key.
2. The Main Menu will be displayed. Use the
arrow keys to scroll through the menu until
STORED CODES is highlighted.
3. Once the STORED CODES menu item has
been highlighted, press the ENTER key to
view the stored codes.
4. If the word NEXT appears above the arrow
keys, there are more stored codes that can
be viewed. Use the arrow key to scroll to the
next stored code.
5. Press the Menu key to return to the Main
Menu.
NOTE
The engine does not need to be running to
navigate the diagnostic gauge screens. If
engine start up is desired, See Starting The
Engine.All of the engine values shown on
the diagnostic gauge indicate the engine is
running.
For a description of trouble codes, see the
chart in the Troubleshooting Section.
1800 RPM
ENG RPM
Main Menu
PV101 SU_0000503
COOL TEMP
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
12.4 VDC
BAT VOLT
OIL PRES
Figure 2-22
PV101 SU_0000504
Select Stored Codes
GO TO 1-UP DISPLAY
EXHAUST FILTER
ENGINE SPEED CONTROL
LANGUAGES
STORED CODES
ENGINE CONFIGURATION
SETUP 1-UP DISPLAY
Figure 2-23
PV101 SU
_
0000505
Enter Ke
y
GO TO 1-UP DISPLAY
EXHAUST FILTER
ENGINE SPEED CONTROL
LANGUAGES
STORED CODES
ENGINE CONFIGURATION
SETUP 1-UP DISPLAY
Figure 2-24
PV101 SU_0000506
FAULT:
FUEL DELIVERY PRESSURE
CORRECTIVE ACTION
CHECK FUEL FILTER AND LINES
< NEXT >
Use Arrow Keys to Scroll
SPN 94 FMI 18
1 of x
Figure 2-25
PV101 SU
_
0000507
FAULT:
FUEL DELIVERY PRESSURE
CORRECTIVE ACTION
CHECK FUEL FILTER AND LINES
< NEXT >
Return to Main Menu
SPN 94 FMI 18
1 of x
Figure 2-26