Sullair 375H - Specifications; Specifications - 300 HH, 375, 375 H John Deere

57
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
Section 3
SPECIFICATIONS
SPECIFICATIONS – 300HH, 375, 375H JOHN DEERE3.1
DIMENSIONS
Model Series Length (I) Width Height Weight (wet)
in mm in mm in mm lb kg
300HH, 375, 375H
2-Wheel (III)
156.2 3967.5 77.2 1960.9 74.0 1879.6 4440* 2014.0*
300HH, 375, 375H
Less Running Gear
98.8 2509.5 59.3 1506.2 63.6 1615.4 4195* 1902.9*
(l) Length over drawbar for 2 – wheel version
(III) American models
*Add 115 lbs (52 kg) for Aftercooled Version
COMPRESSOR 300HH 375 375H
Type Rotary Screw Rotary Screw Rotary Screw
Maximum Operating Pressure 200 psig (13.8 bar) 125 psig (8.6 bar) 150 psig (10.3 bar)
Delivery 300 Free CFM
(142 L/S)
375 Free CFM
(177 L/S)
375 Free CFM
(177 L/S)
Rated Pressure 200 psig (13.8 bar) 100 psig (6.9 bar) 150 psig (10.3 bar)
Cooling Pressurized Compressor Fluid Pressurized Compressor Fluid Pressurized Compressor Fluid
Lubricating Compressor Fluid See Table 1 See Table 1 See Table 1
Sump Capacity 7 US gallons (26.5 liters) 7 US gallons (26.5 liters) 7 US gallons (26.5 liters)
Track Width (III) 67.5" (1714.5 mm) 67.5" (1714.5 mm) 67.5" (1714.5 mm)
Tire Size (Load Range) (III) H78 x 15ST (D) H78 x 15ST (D) H78 x 15ST (D)
Tire Pressure (III) 65 psig (4.4 bar) 65 psig (4.4 bar) 65 psig (4.4 bar)
Wheel Size (III) 15 x 6JJ 15 x 6JJ 15 x 6JJ
Lug Nut Torque (III) 60 ft-lbs (81 Nm) 60 ft-lbs (81 Nm) 60 ft-lbs (81 Nm)
Operating Tilt (maximum) 15° 15° 15°
Electrical System 12 volt 12 volt 12 volt
Compressor Discharge Temp Shutdown 250°F (121°C) Shutdown 250°F (121°C) Shutdown 250°F (121°C)
Service Valves (American) (2) ¾" (2) ¾" (2) ¾"
Service Valves (ce) (3) ¾" + (1) 1-1/4” (3) ¾" + (1) 1-1/4” (3) ¾" + (1) 1-1/4”
Maximum Towing Speed (III) 55 mph (88 kmph) 55 mph (88 kmph) 55 mph (88 kmph)