Sullair 375H - Page 95

89
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.5 AIR INLET SYSTEM & EXHAUST SYSTEM (CONTINUED)
Key Description Part Number Note Quantity
1 elbow, 90m 5/16" tube x 1/8"npt - 02250109-423 1
2 mufer, exhaust 300h-425 ft mtg 02250115-201 1
3 clamp, t-bolt ss band 3.75"id 02250140-364 1
4 clamp, t-bolt ss band 5.00"id 02250140-870 2
5 tube, exhaust 375-600 jd t3 02250164-525 1
6 tube, exhst ext 375-600q t3 02250164-526 1
7 elbow, air inl compr 375-600 t3 02250164-530 1
8 lter, air inl 375-600 cfm 02250164-531 2
9 support, air trs 375 t3 02250164-534 1
10 support, engine air tr 375 jd t3 02250166-794 1
11 hose, air inl eng 375 jd t3 02250166-795 1
12 clamp, t-bolt ss band 5.50"id 042324 1
13 clamp. exhaust 3" - 043713 2
14 cap, rain exhaust 3" - 047208 1
15 clamp, exhaust 375-750 jd 250030-771 1
16 nut, hex f pltd 5/16-18 825305-283 9
17 capscrew, hex gr5 3/8-16 x 1 829106-100 3
18 screw, hex ser washer 5/16-18 x 1 829705-100 5
19 screw, hex ser washer 5/16-18 x 1 1/4 829705-125 4
20 washer, spr lock reg pltd 3/8 837806-094 3
21 washer, pl-b reg pltd 3/8 838206-071 3
22 bulkhead, pipe 1/8" npt 841500-002 2
23 plug, pipe 1/8" 3000# stl plt 866900-005 1
A1 To engine turbo inlet
A2 Use Loctite #2440 typ.
A3 To compressor inlet valve
A4 To engine exhaust outlet