Sullair 375HH - Page 45

39
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
DESCRIPTION
Once the SELECT UNITS menu item has been 3.
highlighted, press the ENTER key to access the
ADJUST CONTRAST function.
There are three choices for units of measurement: 4.
English, Metric kPa, or Metric bar. English is for
Imperial units with pressures displayed in psi and
temperatures in °F. Metric kPa and Metric bar are for
IS units with pressures displayed in kPa and bar
respectively, and temperatures in °C.
Use the arrow keys to highlight the desired units of
measurement.
Press the ENTER key to select the highlighted units.5.
Press the Menu key to return to the Main Menu. 6.
Press Enter Key
SU_0000533
GO
T
O 1-U
P
DISP
L
A
Y
S
T
ORED CODES
ENGINE CONFIG
SETU
P
1-U
P
DISP
L
A
Y
SETU
P
4-U
P
DISP
L
A
Y
ADJUS
T
BACKLIGH
T
SELECTED UNITS
Select Desired Units
SU_0000534
ENGLISH
METRIC K
P
A
METRIC BAR
Press Enter Key to Select
SU_0000535
ENGLISH
METRIC K
P
A
METRIC BAR
Return to Main Menu
SU_0000536
ENGLISH
METRIC K
P
A
METRIC BAR
Figure 2-55
Figure 2-56
Figure 2-57
Figure 2-58