6: Noise Control 375, 375H, 400HH, 425, 425H T4F User Manual
02250223-036 R01
66 Subject to EAR, ECCN EAR99 and related export control restrictions.
Table 6-5: Annual acoustical materials inspection
At least annually inspect all acoustical materials, if any, for security of attachment. Make sure that there is not any material
missing or damaged (refer to Parts List). Clean or replace, if necessary. Do not operate compressor with defective acoustical
material. Remove and replace defective parts by ordering with part numbers indicated in the Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Table 6-6: Annual inspections for proper operation of all systems
In addition to other instructions in the Operator’s Manual, at least annually, operate compressor and inspect to make sure all
systems are operating properly and that engine runs at rated speed and pressure. Do not operate malfunctioning or
improperly adjusted compressor. Repair or adjust, per instructions in Operator’s Manual, as required.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
To Next Page
Loading...
