EasyManua.ls Logo

Sullair 4510 - User Manual

Sullair 4510
146 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®SULLAIR®
INDUSTRIAL AIR COMPRESSOR
3000, 3000P, 3700, 4500,
3000V, 3000PV, 3700V, 4500V
30, 37 & 45 KW/40, 50 & 60HP
Air-Cooled and Water-Cooled
Standard & 24 KT
PART NUMBER:
02250155-601
KEEP FOR
FUTURE
REFERENCE
©
SULLAIR CORPORATION
The information in this document is
correct at the time of printing for utility
compressor serial number
20060701XXXX
and all subsequent serial numbers.
OPERATOR’S MANUAL AND PARTS LIST

Table of Contents

Other manuals for Sullair 4510

Preview: Operator's Manual And Parts List
Operator's Manual And Parts List80 pages

Questions and Answers

  • A
    Amanda RuizAug 22, 2025
    Why my Sullair 4510 will not start?
    • A
      Alexander KellerAug 22, 2025
      If your Sullair Air Compressor won't start, there are several potential causes: * The main disconnect switch might be open. Ensure it is closed. * A line fuse could be blown. Replace the fuse. * The motor starter overload may have tripped. Reset it, and if the issue continues, check the motor starter contacts. * The incoming line voltage might be low. Check the voltage, and if it's low, contact your power company.
  • D
    Desiree Benjamin DDSNov 5, 2025
    What to do if Sullair 4510 Air Compressor shuts down with air demand present?
    • M
      Michael FischerNov 5, 2025
      If your Sullair Air Compressor shuts down while there's still air demand, consider these possible causes and solutions: * There might be a loss of control voltage. Check the power supply for a 24V DC output and replace the power supply if necessary. * Low incoming voltage could be the issue. Consult your power company. * Excessive operating pressure may be the cause. Reset the system, and if the problem persists, ensure the line pressure doesn't exceed the compressor's maximum operating pressure. * The separator may require maintenance. Replace the separator. * The machine might be programmed for the wrong pressure setting. Reprogram it using a WSPC-equipped laptop. * A defective regulator valve could be the culprit. Repair it if it's not causing the inlet valve to close when ...

Summary

Safety Precautions and Guidelines

General Safety and PPE

General safety rules, personal protective equipment, and hazard awareness.

Pressure Release and Electrical Safety

Procedures for safe pressure release and preventing electrical shock.

Hazard Prevention: Fire, Moving Parts, and Environment

Safety measures for fire, explosion, moving parts, heat, and toxic substances.

Compressor Installation Guidelines

Mounting and Ventilation Requirements

Proper mounting, ventilation, and cooling requirements for compressors.

Electrical Preparation and Motor Rotation

Electrical wiring standards, grounding, and motor rotation verification.

Maintenance Procedures and Troubleshooting

Routine Maintenance Tasks

Troubleshooting Common Compressor Issues

Guide to identifying and resolving common compressor problems and symptoms.

Sullair 4510 Specifications

General IconGeneral
BrandSullair
Model4510
CategoryAir Compressor
LanguageEnglish

Related product manuals