SECTION 3 3000P-4500 USER MANUAL
31
3.8 IDENTIFICATION, WATER-COOLED
KEY
NO.
PART NO.
Q
T
Y
DESCRIPTION
1 ALLOW 4.00 FEET [1.25 METERS] MINIMUM CLEARANCE
AROUND MACHINE FOR ACCESS AND FREE CIRCULATION
OF AIR.
2 A FOUNDATION OR MOUNTING CAPABLE OF SUPPORTING
THE WEIGHT OF PACKAGE, AND RIGID ENOUGH TO MAIN-
TAIN THE COMPRESSOR FRAME LEVEL IS REQUIRED. THE
COMPRESSOR FRAME MUST BE LEVELLED AND SECURED
BETWEEN THE FRAME AND THE FOUNDATION. NO PIPING
LOADS ARE PERMITTED AT EXTERNAL CONNECTIONS.
3 ALL DIMENSIONS ARE +/- .50" [12.7MM].
4 RECOMMENDED INCOMING CUSTOMER POWER SUPPLY IS
SHOWN ON DRAWING.
5 IF DUCTWORK IS TO BE INSTALLED FOR COOLING AIR,
HIGH STATIC FAN MUST BE SELECTED. MAX ALLOWABLE
ADDITIONAL STATIC PRESSURE 0.4 IN WATER WITH HIGH
STATIC FAN.
6 DOORS ARE REMOVABLE USING LIFT-OFF HINGE PINS.
7 ALL DIMENSIONS SHOWN IN INCHES WITH MILLIMETER
DIMENSIONS IN PARENTHESES.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
MACHINE WEIGHTS
Main Motor
HP
Motor Type Weight
Cooling Air
(CFM)
3000P 40 odp 1993 lbs/904 kg 730
3000P 40 tefc 2059 lbs/934 kg 730
3700 50 odp 2043 lbs/927 kg 730
3700 50 tefc 2127 lbs/ 965 kg 730
4500 60 odp 2193 lbs/955 kg 730
4500 60 tefc 2270 lbs/1030 kg 730
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
