SECTION 2 600H, 700HH, 750, 750H, 750HH, 825, 900H, 1050 USER MANUAL
45
2.15 PIPING AND INSTRUMENTATION DIAGRAM—LP ENGINE SYSTEM
Key Qty Description
1 1 TURBOCHARGER, ENGINE
2 1 COOLER, CHARGE AIR
3 1 MUFFLER, ENGINE
4 1 SENDER, FUEL LEVEL
5 1 DEARERATION TANK
6 1 FILTER, FUEL W/ WATER SEPARATOR
7 1 PUMP, FUEL (INTERNAL TO ENGINE)
8 1 PUMP, FUEL HAND OPERATED PRIMING
9 1 FILTER, FUEL
10 1 VENT, FUEL TANK
11 1 CAP, FUEL TANK FILL
12 1 THERMOSTAT, THERMOCORD(OPTIONAL)
13 1 KIT, ETHER ASSEMBLY
14 1 PUMP, OIL (INTEGRAL TO ENGINE)
15 1 BY-PASS VALVE (INTERNAL TO ENGINE)
16 1 COOLER, OIL (INTERNAL TO ENGINE)
17 1 FILTER, OIL
18 1 PUMP, WATER (INTEGRAL TO ENGINE)
19 1 RADIATOR, ENGINE
20 1 ENGINE THERMO (INTEGRAL TO ENGINE)
21 1 SENSOR, INLET AIR PRESS(TURBO BOOST)
22 1 SWITCH, COOLANT LEVEL
23 1 SENSOR, FUEL PRESSURE
24 1 SENSOR, FUEL TEMPERATURE
25 1 SENSOR, COOLANT TEMPERATURE
26 1 SENSOR, ENGINE OIL PRESSURE
27 1 SENSOR, CAM SPEED TIMING
28 1 SENSOR, CRANK SPEED TIMING
29 1 HEATER, WATER JACKET (OPTIONAL)
30 1 OIL LEVEL (DIPSTICK)
31 1 FILTER, AIR
32 1 TANK, FUEL
33 1 PAN, ENGINE OIL
34 1 GAUGE, FILTER RESTRICTION
35 1 SENSOR, INLET AIR TEMPERATURE
36 1 VALVE, RELIEF (INTEGRAL TO ENGINE)
37 1 VALVE, AIR STOP (OPTIONAL)
38 1 EXHAUST, DIESEL PARTICULATE FILTER
39 1 VALVE, 3 WAY
40 1 PUMP, FUEL ASSIST
41 1 PUMP, CAT PRIMING/ARD
42 1 GLASS, SIGHT COOLANT LEVEL
43 1 CAP, COOLANT SYSTEM FILL
Notes:
L1 COOLANT LEVEL
L2 FUEL LEVEL
L3 OIL LEVEL (DIPSTICK)
P5 INLET MANIFOLD AIR PRESSURE
P6 FUEL PRESSURE
P7 OIL PRESSURE
T7 INLET AIR TEMPERATURE
T8 FUEL TEMPERATURE
T9 COOLANT TEMPERATURE
S1 CAM SPEED
S2 CRANK SPEED
Key Qty Description
To Next Page
Loading...
