Section 7
ILLUSTRATIONS AND PARTS
77
7.12A INLET VALVE AND PARTS (6.5”) - 900XH
key part
number description number quantity
1 adapter, inlet 8.5” to 6.5” 02250062-124 1
2 plug, sae 45 deg 5/16 1/2-20 02250109-209 1
3 hose, medium pressure 5/16 x 4.5”lg 37$s jic 02250110-100 1
4 orifice, .109 .25 fnpt x .25 mnpt 02250118-588 1
5 valve assembly, inlet 6” 350psi (I) (II) 02250141-182 1
6 gasket, 11 x 8 5/8 x 1/32 040422 1
7 gasket, 1/32 x 6 1/4idx8 1/4od 040696 1
8 plug, pipe 1/2” 3000# stl 807800-020 2
9 nut, hex unfin 1/2-13 824208-448 1
10 capscrew, ferry head hd 3/4-10 x 1 1/4 828412-125 1
11 washer, spr lock 1/2 837508-125 1
12 stud, threaded 1/2-13 x 3 839408-030 1
13 connector, 37 fl/mpt pltd 5/16 x 1/4 860105-025 1
14 elbow, 37fl 90m 5/16 x 1/4 860205-025 4
15 tee, pipe pltd 1/4 868430-010 1
16 nipple, pipe-hx pltd 1/4 x 1/4 868504-025 1
17 bushing, red hex pltd 1/2 x 1/4 868902-010 1
(I) For maintenance on 6.5” inlet valve assembly no. 02250054-763, order repair kit no. 02250073-277,
and replacement gasket no. 040696 (refer to key number 7 of this Section).
(II) For additional information pertaining to the 6.5” inlet valve assembly, refer to Section 7.13A, Inlet
Valve Parts- 6.5” - 900XH.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
