Sullair DEX Series - ELECTRICAL DATA; TIME, PRESSURE, TEMPERATURE, AND DEWPOINT SETTINGS; DIMENSIONS AND WEIGHT; FILTER MODELS

SECTION 3 DEX HEATED REGENERATIVE DRYER
15
3.6 ELECTRICAL DATA
3.7 TIME, PRESSURE,
TEMPERATURE, AND
DEWPOINT SETTINGS
3.8 DIMENSIONS AND WEIGHT
3.9 FILTER MODELS
Power Supply 480 volt, 3 phase, 60 Hz
Installed power _____KW
Electrical Encolsure NEMA 12
Control voltage 120 Volts A.C.
Solenoid coil voltage 120 Volts A.C.
Adsorption time 240 minutes
Regeneration time 240 minutes
Heating time 140 minutes
Cooling time 100 minutes
Heater outlet
temperature
350°F
Regen. heater
sheath over temp.
650°F
Adsorption pressure 100 Psig (minimum)
Dewpoint controlled
changeover
-40°F
High Dewpoint
alarm setting
+32°F
Width _____”inches
Height _____”inches
Depth _____”inches
Weight Approx. _____lbs
Pre-filter Model _____
Pre-filter element _____
After filter model _____
After filter element _____
Control Air Filter _____
Control Air Element _____