Section 7
ILLUSTRATIONS AND PARTS LIST
43
7.9 INLET CONTROL
key part
number description number quantity
1 rod, intake control valve 02250044--810 1
2 spring, intake check 250034--619 1
3 retainer, intake control valve 02250044--809 1
4 gasket, inlet valve 250025--425 1
5 head, intake control valve 02250044--808 1
6 housing, intake control
(I)
250025--310 1
7 hose, nylon 1/4” 02250054--861
8 elbow, 90
_
M 1/8”npt x 1/4” tube 250025--849 1
9 piston, intake control valve 02250044--811 1
10 seal, intake control piston 02250044--671 1
11 washer, Belleville spring 250031--269 2
12 capscrew, #10--32 x 1/2” Nylok 02250043--162 1
13 spring, inlet control 02250042--966 1
14 cap, air intake 250029--898 1
15 ring, retaining internal 1 3/8” 836150--137 1
(I)
For maintenance on inlet control valve, order replacement piston seal kit no. 02250045-287, and replace-
ment piston no. 02250044-811.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
