Section 9
ILLUSTRATIONS AND PARTS LIST
99
9.18 INSTRUMENT PANEL- ELECTRO-MECHANICAL
key part
number description number quantity
1 elbow, 90º 1/4"T x 1/8"P 250041-286 2
2 tee, adaptor 1/4"T x 1/8"M x 1/8"F 869704-012 2
3 connector, tube-F 1/4" x 1/8" 250021-379 2
4 connector, tube-F 1/4"T x 1/8"P 250139-050 3
5 decal, warning auto start (I) 041065 1
6 screw, hex ser washer 5/16" x 3/4" 829705-075 1
7 screw, hex ser washer 1/4" x 3/4" 829704-075 1
8 support, instrument panel (40, 50HP/ 37KW) 02250112-641 1
•support, instrument panel (60-75HP/ 45-56KW) 02250142-586 1
•support, instrument panel (100HP/ 75KW) 02250142-670 1
9 nut, hex washer 5/16" 825305-283 1
10 support, instrument panel 02250044-405 1
11 angle, instrument panel 02250044-407 1
12 nut, hex washer 1/4" 825304-236 1
13 panel, instrument 02250125-351 1
14 decal, instrument panel 02250051-301 1
15 gauge, temperature 100º-250º 02250100-096 1
16 gauge, pressure 0-230# 250005-185 2
17 gauge, differential pressure 0-30PSI 250003-799 1
18 gauge, differential pressure 0-15PSI 250003-798 1
19 gauge, vacuum 0-30" water 250003-797 1
20 plate, serial number 02250059-318 1
21 rivet, pop 1/8" x 1/2" 843102-050 4
22 screw 874404-014 8
23 controller E/M 02250119-824 1
24 gasket, panel supervisor 02250048-822 1
25 switch, push button - red 02250085-504 1
26 nut, hex washer 5/16" 825305-283 4
27 nameplate, yellow ring 02250081-473 1
28 harness, wiring (domestic) (not shown) 02250120-461 1
29 harness, wiring (European) (not shown) 02250120-462 1
(I) For additional controller box decal locations for electro-mechanical controllers, consult Section 9.19,
Instrument Panel- Supervisor Controller (decal part numbers 17-23).
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
Need help?
General
