Subject to EAR, ECCN EAR99 and related export control restrictions. 02250236-267 R02
Introduction
The user manual gives details related to the specifications, construction, installation, operation,
maintenance and inspection of the Oil Free Scroll Air Compressor.
Table of Contents
1
● Daily Operating Components
● Installation
1. Product Confirmation
2. Transporting the Air compressor
3. Installing the Air compressor
4. Piping the Air compressor
5. Wiring the Air compressor
● Operation
1. Control Panel Descriptions
2. Prior to Operation
3. Start Up
4. Daily Operation
● Maintenance and Inspection
● Troubleshooting
● ID Drawings
● Wiring Diagram
● Standard Specifications
・・・・・・・・・・ 2
・・・・・・・・・・ 4
・・・・・・・・・・ 4
・・・・・・・・・・ 4
・・・・・・・・・・ 5
・・・・・・・・・・ 7
・・・・・・・・・・ 8
・・・・・・・・・・ 12
・・・・・・・・・・ 12
・・・・・・・・・・ 14
・・・・・・・・・・ 19
・・・・・・・・・・ 20
・・・・・・・・・・ 21
・・・・・・・・・・ 29
・・・・・・・・・・ 34
・・・・・・・・・・ 36
・・・・・・・・・・ 38
Safety Precautions (continued)
● If the air compressor has not run in over one (1) month, carry out the long term storage operation
prior to restarting the air compressor (see page 28).
Failure to adhere to this precaution may cause abnormal wear to the air compressor components, damage to the air
compressor and/or accidents.
● Verify that the front door chain has been connected before closing the door.
● Make sure that there is no excessive noise from the V-belt. If the V-belt is loose and/or slips, it may
cause excessive noise and/or damage to the air compressor. If it is necessary to adjust the V-belt,
please contact the local Sullair distributor.
Failure to adhere to this precaution may cause belt slippage, damage to the air compressor and/or excessive noise.
CAUTION
To Next Page
Loading...
