Section 2
DESCRIPTION
13
Figure 2 ---6 Instrument Panel Group
S
The
stop
pushbutton turns the compressor off.
S
The
hourmeter
records cumulative hours of op-
eration of the compressor. It is useful for planning
and logging service operations.
S
The
separator maintenance gauge
monitors the
condition of the separator elements. Pointer will
move into the red zone when the elements should
be replaced. This gauge is automatically reset after
the elements have been replaced.
S
The
fluid filter maintenance gauge
monitors the
condition of the fluid filter element. Pointer will move
into the red zone when the element should be re-
placed. This gauge is also automatically re---set af-
ter elements have been changed (for fluid filter loca-
tion see Figure 2---3).
S
The
red light
on the instrument panel indicates
when power to the compressor is supplied.
S
The
green light
indicates when the compressor is
running.
To Next Page
Loading...
