22 COMPONENT DESCRIPTION
4.8.2 ENGINE SHUTDOWN
The second level of protection in the controller is engine shutdown. If the derate feature cannot correct the
unsafe parameters or the engine does not stall, the controller will shutdown the engine to protect it from
damage.
NOTE! The warning and shutdown lights will be lit on the control panel when this occurs.
If either of these protection features activate, the engine requires inspection by an authorized distributor
of Sullivan-Palatek products or an authorized engine manufacturer’s dealer before attempting to run the
machine again.
WARNING! Failure to inspect and correct the fault in the engine or at the point of the external sensor will result in
repeated derates and shutdowns, which can and will oen lead to engine damage.
NOTE! The engine soware stores all derate and shutdown information to be reviewed by the engine manufacturer’s
representative. Attempts to restart the compressor without repairing the fault sensed by the protection
system will be recorded in the engine soware and will void the engine manufacturer’s warranty.
4.9 NOISE CONTROL SYSTEMS
Noise control systems incorporated in this compressor have been designed to meet the requirements
of federal noise control regulations. The principal components of the noise control systems include the
enclosure, engine exhaust system, and compressor intake system. The enclosure has been designed to
and oil cooler.
To Next Page