Sumitomo HF-520 Series - Preface; Applicable Documentation; Symbols

10
i.1 Preface
i.1 Preface
Sumitomo manufactures products used as components in a wide variety of industrial
systems and equipment. The selection and application of Sumitomo products remain
the responsibility of the equipment manufacturer or end user. Sumitomo accepts no
responsibility for the way its products are incorporated into the nal system design. Under
no circumstances should any Sumitomo product be incorporated into any product or design
as the exclusive or sole safety control. Without exception, all controls should be designed to
detect faults dynamically and fail safely under all circumstances. All systems or equipment
designed to incorporate a product manufactured by Sumitomo must be supplied to the end
user with appropriate warnings and instructions as to the safe use and operation of that part.
Any warnings provided by Sumitomo must be promptly provided to the end user. Sumitomo
oers an express warranty only as to the quality of its products in conforming to standards
and specications published in the Sumitomo manual. NO OTHER WARRANTY, EXPRESS
OR IMPLIED, IS OFFERED. Sumitomo assumes no liability for any personal injury, property
damage, losses, or claims arising from misapplication of its products.
This manual is designed to ensure correct and suitable application of HF-520 Series drives.
Read this manual before attempting to install, operate, maintain, or inspect a drive and keep
it in a safe, convenient location for future reference. Be sure you understand all precautions
and safety information before attempting application.
◆
Applicable Documentation
The following manuals are available for HF-520 series drives:
HF-520
HF-520 Series Operating and Maintenance Manual No. DM2301E
Read this manual rst. This guide is packaged together with the product. It
contains basic information required to install and wire the drive. This guide
provides basic programming and simple setup and adjustment. Refer to the
HF-520 Technical Manual for complete descriptions of drive features and
functions.
HF-520
Series Technical Manual No. DM2302E
This manual describes installation, wiring, operation procedures, functions,
troubleshooting, maintenance, and inspections to perform before operation.
◆
Symbols
Note: Indicates a supplement or precaution that does not cause drive damage.
TERMSTERMS
Indicates a term or denition used in this manual.