Summer Baby Pixel - User Manual

Thank you for purchasing the Baby Pixel™ Digital Color Video
Monitor by Summer Infant. Please read the following
instructions and warnings carefully. Keep this instruction
manual for future reference.
Moonlite™ Night Vision Boost
The MoonliteTM Night Vision Boost feature is to help provide better
viewing of your baby, temporarily, when the room is dark. Press and
hold the MOONLITE button to illuminate a small LED light on the
camera. A MOONLITE icon will appear in the lower right-hand
corner of the screen while button is pressed. When you release the
button, the camera will return to normal black & white night vision.
Moonlite will automatically turn off after several seconds.
Depending on how far you have placed the camera from the crib,
you can optionally adjust the MOONLITE brightness.
Charge the Handheld
Charge for 7 hours before
first use.
Install the Camera
For best picture focus, place camera 6 to 8 ft. from crib. Plug in
camera. Place camera on a flat surface, such as a tabletop, or
shelf or mount the camera on a wall using the screw and wall
anchor provided.
tabletop wall mount
MONITOR USER GUIDE
SET-UP
1
SET-UP (continued)
1
or
Secure the Camera Cord
NEVER place the camera or
cords within 3-feet of the
crib. Secure the cord to your
wall using the 6 security clips
included to keep the cord
away from baby’s reach.
3ft.
Congratulations! You are now ready
to use your Baby Pixel™ Digital Color
Video Monitor!
3 sec.
Power on the Camera and
Handheld
Press the power/nightlight button on
the camera and hold for 3 seconds.
A green light will appear near the
lens.
Press and hold the power button on
the handheld unit for 3 seconds. The
handheld will automatically sync
with the camera.
(The handheld unit
and the camera are paired at the factory
for privacy reasons. If the handheld and
camera are not paired with each other for
any reason, see Adding a Camera in the
user guide.)
Screen Icons
Function Buttons
Clock 12/24 HR
Vox Indicator
Zoom
Nightlight
Temperature
Reception
Camera Selection
Battery Life/ Plugged In
Power/Menu
Moonlite™
Zoom/Video
Camera Steering
Volume
Moonlite™ Brightness
Camera Options
Time / Temp Settings
Screen Brightness
Talk-back
SleepZone™
Vox on / off
Nightlight
SCREEN ICONS & FUNCTION BUTTONS
2
29790
7hr.
Summer Infant, Inc. | 1275 Park East Drive | Woonsocket, RI 02895 | 401-671-6551 12/17
STRANGULATION HAZARD:
Children have strangled
in cords. Keep this cord
out of the reach of
children (more than 3 ft.
(0.9m) away).
WARNING
Read all warnings prior to using this product.
Touch Screen Function
Buttons
10:50 AM
10:50 AM
USING THE HANDHELD
3
Moonlite™ Brightness
Adjustment
Press the MENU button.
Touch the MOONLITE icon in
the touchscreen. Press
either the plus or minus icon
to adjust the moonlight
brightness. Caution: Do not
stare directly at Moonlite
LED for prolonged periods of
time.
Menu/Power
Press the MENU/POWER
button to access the
touchscreen menu
features screen. Press
and hold the
MENU/POWER button
for 3 seconds to turn off
handheld.
Sound Activated Lights
The LED light bar on the top of the
handheld will light up as it picks up
noises, even in power save mode.
When battery is low, the first LED
flashes red and handheld beeps.
3 sec.
Flip out the kick-stand and place the
monitor on a stable, level surface.
Talkback
Press the MENU button.
Touch and hold the
TALKBACK icon in the
touchscreen. You can
speak with your baby.
Release the button when
done talking to the baby. The
icon will reduce down
to the smaller talkback
icon. The TALKBACK icon will
remain on the screen for 10
seconds. You can begin
talking again by pressing and
holding the icon within that
time. To exit talk-back mode,
press the menu button once
or wait 10 seconds to
automatically exit talk-back
mode.
Brightness
Press the MENU button.
Touch the BRIGHTNESS
icon in the touchscreen
menu. Press either the
plus or minus icon to
adjust brightness.
Nightlight
Press the MENU button.
Touch the NIGHTLIGHT
icon in the touchscreen.
Touch the BLUE
NIGHTLIGHT ICON and
the camera will emit a
soft blue glow. Touch the
RED NIGHTLIGHT ICON
and the camera will emit
a warm red glow. Nightlights are comforting to little ones,
especially toddlers who become scared in a pitch black room.
Touch the GRAY NIGHTLIGHT ICON to turn off.
Vox (Voice Activated
Video) On/Off
The Vox feature, when on,
will turn on your screen
when it is power save
mode and the camera
picks up a sound. To turn
Vox mode off, press the
MENU button. Press the
VOX icon. Turn vox alert
on or off. Vox icon is
displayed on indicator
bar when active.
SleepZone™ Virtual
Boundary
The SleepZoneTM feature
creates a virtual boundary
area within your screen view
and is designed to help alert
you with a sound on your
handheld if any object
crosses through this boundary
box. To use SleepZone, first
press the MENU button. Press
the SLEEPZONE icon. Press the
MINUS/PLUS icon on the
lower left-hand side of your
screen to adjust between the
two box size options – small
or large. You can use camera
steering and the zoom button
to position the box around
your baby. Choose alert
volume level by pressing one
of the alert icons on the right
side of the screen. Press
CHECK to complete
SleepZone set up.
X icon and boundar y box will
stay visible while in the
SleepZone mode. To exit out
of SleepZone mode, press the
X icon.
Recommended to plug in
your handheld when using
the SleepZone feature to
extend battery life.
Volume
Use the up/down arrow
buttons to increase and
decrease the volume.
1 sec.
Video On/Off Power Save
To conserve battery power,
press and hold the VIDEO
button for 1 second to turn off
the handheld’s video. The
screen will go dark. This feature
allows you to preserve battery
life when not plugged into A/C
adapter. The audio feature will
remain activated allowing you
to monitor sounds. You can turn
the screen back on by pressing
the video button or tapping
the screen or moving the
handheld. When handheld is
not plugged in, screen will
automatically turn off after 30
seconds.
If Vox feature is on, video will
turn on automatically when
sound is detected.
360Tilt™ Camera Steering
Press and hold the camera steering button. This feature allows you
to control the camera viewing position remotely by tilting the
handheld backward and forward and side to side. The camera will
replicate the position of the handheld until you release the button.
Touchscreen Camera Steering
Tap the camera steering button once. Four camera steering arrows
will appear on the screen. Touch or hold the arrows to reposition
the camera.

Summary

Set-up Guide

Charge the Handheld

Charge the handheld unit for 7 hours before first use for optimal battery performance.

Install the Camera

Place camera and plug it in. Secure cord with clips for safety.

Secure the Camera Cord

Use security clips to keep the camera cord within 3-feet of the crib away from baby's reach.

Screen Icons and Function Buttons

Screen Icons Overview

Overview of icons displayed on the handheld screen like Vox, Nightlight, Temperature, and Battery Life.

Function Buttons Description

Description of buttons like Power/Menu, Zoom/Video, Volume, and Talk-back for controlling the monitor.

Using the Handheld Monitor Features

Adjusting Volume

Use up/down arrow buttons to increase and decrease audio volume for monitoring.

360 Tilt Camera Steering

Control camera viewing position remotely by tilting the handheld backward and forward.

Touchscreen Camera Steering

Reposition the camera using on-screen arrows by tapping or holding them.

Moonlite Night Vision Boost

Temporarily improve baby viewing in the dark by illuminating a small light on the camera.

Adjusting Screen Brightness

Adjust screen brightness via the touchscreen menu using plus or minus icons.

Moonlite Brightness Adjustment

Adjust the Moonlite LED brightness via the touchscreen menu.

Video On;Off Power Save Mode

Turn off handheld video to conserve battery, audio remains active.

Sound Activated Lights Feature

LED light bar on handheld lights up as it picks up noises, indicating sound.

Talk-back Functionality

Press and hold the TALKBACK icon to speak to the baby through the camera.

Vox (Voice Activated Video)

Turn Vox feature on to activate camera/video when sound is detected.

SleepZone Virtual Boundary

Set a virtual boundary to alert if objects cross it, with adjustable size and alert volume.

Nightlight Activation

Activate soft blue or warm red glow from the camera using touchscreen icons.

Advanced Handheld Operations

Camera Options Menu

Access menu to scan, view, add, or delete cameras, and select specific cameras.

Adding a Camera

Sync additional cameras by holding the camera power button and adding via handheld menu.

Scanning Cameras

Automatically cycle through multiple synced cameras on the screen.

Deleting a Camera

Remove unwanted synced cameras from the handheld monitor.

Select Camera View

Manually choose which camera feed to view on the handheld monitor.

Time and Temperature Settings

Set clock format (12/24hr) and temperature unit (F/C) in the settings menu.

Safety Precautions

STRANGULATION HAZARD

Keep cords out of reach of children (more than 3 ft. away) to prevent strangulation.

BATTERY WARNING

Use only the provided rechargeable battery and follow safety guidelines for handling.

IMPORTANT SAFETY INSTRUCTIONS

General safety precautions for product operation, cleaning, and maintenance.

Troubleshooting Guide

No picture or sound

Troubleshooting steps for when the monitor displays no video or audio.

Sound but no picture

Steps to resolve issues where audio is present but the video feed is absent.

Screen auto-activation

Guidance on managing the screen turning on automatically due to Vox or movement.

Handheld unit beeping

Diagnose causes for the handheld unit beeping, such as low battery or no signal.

Incorrect temperature reading

Troubleshoot temperature display issues, possibly due to extreme room conditions.

Picture but no sound

Solutions for when video is visible but no audio can be heard.

Camera sync failure

Steps to re-sync the camera and handheld monitor if pairing fails.

Unclear picture quality

Tips for improving picture clarity, including brightness and camera placement.

Speaker squealing sound

Address feedback or squealing sounds by adjusting monitor placement or volume.

SleepZone false alerts

Adjustments for SleepZone to prevent false alerts by modifying boundary or zoom.

SleepZone no alerts

Check SleepZone activation and volume settings if alerts are not triggering.

Replacement Parts Information

Order Replacement Parts

Information and contact details for ordering extra cameras or replacement adapters/batteries.

Customer Support Contact

Contact Customer Support

Customer service contact information for support and inquiries.

Summer Baby Pixel Specifications

General

Night Vision	Yes
Two-way Talk	Yes
Connectivity	2.4GHz FHSS
Temperature Sensor	Yes
Lullabies	Yes
Vibration Alerts	No
Features	Sound activation
Power Source	Rechargeable battery
Type	Digital