Oven Cleaning and Maintenance
Oven ceiling
If the oven ceiling is dirty, the Broiler can be
lowered to make cleaning easier.
To avoid the danger of burning, wait until
the Broiler is cold before lowering it.
Proceed as follows:
1. Turn the Broiler support by 90º (1).
2. Lower the Broiler gently (2). Do not use
excessive force as this may cause
damage.
3. After cleaning the ceiling, put the Broiler (2)
back in its place, carrying out the previous
operation.
IMPORTANT WARNING: The Broiler heating
element support (1) may fall when it is rotated.
If this happens, insert the Broiler heating
element support (1) into the slot in the ceiling
of the cavity and rotate it 90º to the Broiler
heating element support (2) position.
The mica cover (3) located in the ceiling
must always be kept clean. Any food
remains that collect on the mica cover can
cause damage or provoke sparks.
Do not use abrasive cleaning products or
sharp objects.
To avoid any risk, do not remove the mica
cover.
The glass lamp cover (4) is located on the
oven ceiling and can be removed easily for
cleaning. For this you just need to unscrew it
and clean it with water and dishwashing liquid.
Accessories
Clean the accessories after each use. If they
are very dirty, soak them first of all and then
use a brush and sponge. The accessories can
be washed in a dish washing machine.
Make sure that the turntable plate and the
respective support are always clean. Do not
switch on the oven unless the turntable and
the respective support are in place.
To Next Page
Loading...
