USE
UNPACK AND INSPECT THE PARTS OF THIS UNIT
Remove all packing materials and parts. Inspect to make sure all parts listed below
are present.
1 Draft arm assembly (with washer)
1 CO2 cylinder
1 CO2 regulator
1 Keg tap (American Sankey Type, see next section for other tap options)
1 Cleaning kit
Vinyl tubing
1 Stainless steel (removable) floor to protect the from keg insertion
1 Guard rail
1 Drip tray
4 Casters ( for conversion to portable beer cooler)
2 Hose clamps
2 Removable shelves (installed) for conversion to a beverage refrigerator
8 Small Phillips head screws
4 Large Phillips head screws
2 Retainer fixing screws
OPERATING
DISPENSING BEER
Follow the steps below to dispense beer:
10
To Next Page
Loading...
