EasyManua.ls Logo

Summit SBC490 - Important Safety

Summit SBC490
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING!
To reduce the risk of fire, electric shock, or injury when using your appliance,
follow these basic precautions:
*Read all instructions before using the appliance.
*The appliance must be correctly connected to the power supply.
*Immediately replace worn power cords, loose plugs and power outlets.
*Do not operate your appliance in the presence of explosive fumes.
*Disconnect the appliance from the power supply before repairing or cleaning it (only
qualified technician should repair it).
*Do not let children play with this or any other appliance to reduce likelihood of
injury.
*Never stand on top or inside of this appliance, or swing on the door.
*Do not operate valve control unless cylinder is completely installed and connected.
Important Safety
Precautions of CO
2
(Carbon Dioxide) Gas
Always connect the CO
2
cylinder to a regulator! Failure to do so may cause an
explosion resulting in possible death or injury when the cylinder valve is opened.
Never connect the CO
2
cylinder directly to the product container.
Always keep CO
2
cylinders away from heat. Store extra cylinders in a cool place
(preferably 70ºF). Securely fasten cylinders with a chain in an upright position
when storing.
Never drop or throw a CO
2
cylinder
Always check the D.O.T (Department of Transport) test date on the cylinder
neck before installation. If it has been over 5 years, do not use. Return the
cylinder to your gas supplier
Never connect a product container unless there are at least two safety devices in
the pressure system; one on the CO
2
regulator and the other on the product
container or in the pressure gas line.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
4

Other manuals for Summit SBC490

Related product manuals