Chapter 6 Security and MIDlet Signing 53
FIGURE 27 Creating a new key pair
After you click on Create, the toolkit prompts you to choose a protection domain.
The connection between the key pair you just created and a protection domain
might seem oblique, but it makes perfect sense:
■ The toolkit creates a self-signed root certficate using the key pair you just
created.
■ The root certificate is added to the emulator’s list of root certificates.
■ The toolkit needs to associate the root certificate with a protection domain.
Now imagine what happens when you install a MIDlet suite signed with your new
key:
■ The implementation examines the certificate chain in the MIDlet suite descriptor.
In this case the certificate chain is a single certificate, the self-signed root.
■ The implementation tries to find the root of the certificate chain in its internal
list. This succeeds because the root certificate was added when you create the
key pair.
■ The implementation considers the certificate valid and uses it to verify the
signature on the MIDlet suite.
■ The MIDlet suite is installed into whatever protection domain you picked.
6.4.2 Getting Real Keys
The ability to create a key pair and sign a MIDlet within the J2ME Wireless Toolkit
environment is for testing purposes only. When you run your application on an
actual device, you must obtain a signing key pair from a certificate authority
recognized by the device.
To Next Page
Loading...
Need help?
General