8-12 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
2. Confirm the XCP version.
To confirm the XCP version, see the figure of a four-digit number that exists in the
firmware program (tar.gz) file name. The latest XCP information is released on
a web site. To obtain the URL of the web site, see the description of the firmware
download in the “Preface” on page xvii.
■ Command operation
1. Log in to XSCF Shell.
2. Import XCP.
a. Use the getflashimage(8) command to confirm the list of the firmware
program files (tar.gz) that are still on the system.
b. Use the getflashimage(8) command to specify the firmware program
(tar.gz) file and import XCP to the system.
(The update is not performed at this point.)
XSCF> getflashimage -l
Existing versions:
Version Size Date
FFXCP1080.tar.gz 51298982 Thu Jan 15 20:09:09 JST 2009
<Example> Login a remote ftp server specifying the user name and
host name that requires authentication password, then, import the
new 1082 version firmware program (tar.gz).
XSCF> getflashimage -u yyyyy ftp://imgserver/img/FFXCP1082.tar.gz
Existing versions:
Version Size Date
FFXCP1080.tar.gz 51298982 Thu Jan 15 20:09:09 JST 2009
Warning: About to delete old versions.
Continue? [y|n]: y
Removing FFXCP1080.tar.gz.
Password: [not echoed]
0MB received
1MB received
2MB received
...
40MB received
Download successful: 41470 Kbytes in 46 secs (940.250 Kbytes/sec)
MD5: 683fb5240e4937948dd6ad83b4a99669
To Next Page
Loading...
Need help?
General
