Sun Yeh Electrical OM Series - Page 34

Quarter -Turn Electric Valve Actuator【OM Series】 Sun Yeh Ele. Ind. Co., Ltd. | 2021.11
32
6.7.2 Sensitivity Switch Setting (SR1)
 OM-2 to OM-13 and OM-H Factory setting:
Select "MODBUS" control, the sensitivity is preset to 1.
Select "analog signal" control, the sensitivity is preset to 7.
 OM-F and OM-G Factory setting：
Select "MODBUS" control, the sensitivity is preset to 0.
Select "analog signal" control, the sensitivity is preset to 0.
 When analog signal is selected：
Switch to 1: the highest sensitivity.
Switch to 0: the lowest sensitivity.
6.7.3 LED Indication
OM-A, OM-AM and OM-1
OM-2 to OM-13, OM-F, OM-G and OM-H
Lamp
Actuator Status
OPD
Fully-Open Position
OP
Opening Direction
REM
Remote Control Mode
PL
Alerting Signal
SL
Setting Mode
LOC
Local Control Mode
CL
Closing Direction
CLD
Fully-Closed Position
LR
MCU Indication
Lamp
Actuator Status
OPD
Fully-Open Position
OP
Opening Direction
REM
Remote Control Mode
PL
Alerting Signal
SL
Setting Mode
LOC
Local Control Mode
CL
Closing Direction
CLD
Fully-Closed Position
LR1
MCU Indication