Sun Yeh Electrical OM Series - Page 37

Quarter -Turn Electric Valve Actuator【OM Series】 Sun Yeh Ele. Ind. Co., Ltd. | 2021.11
35
6.7.6 Time Delay Setting (OM-A, OM-AM, OM-1 )
a. Press “MODE” several times until displays, then press “SET” once to
enter parameter setting mode.
b. Get into and Press and hold “SET” around 3 sec to enter setting mode.
c. Follow the table below to select the required timing by pressing “UP” or
“DOWN”.
Selection
1
2
3
4
5
6
7
8
9
10
Running time
(Sec)
Standard
30
60
80
100
120
150
180
200
200
If the setting time is less than the original time of the actuator, the
product can’t be executed according to the running time of the set
segment.
d. Press “SET” once to complete the time delay setting.
e. Press “MODE” 5 times to go back to position indicator to complete the setting.
6.7.7 Warning Message
a. Press ”MODE” once until displays, then press “SET” once to get into
warning message.
b. Press ”UP” or ”DOWN” to review the history log of warning message.