Sunbeam 400 - Disassembly

9
10. Continue firmly pushing on the food pusher
for better results (13).
Note: Always keep fingers away from the
continuous flow chute when the food processor
is in operation.
11. When slicing/shredding is complete, turn the
continuous flow attachment to the right
(clockwise); this will stop the food processor (14).
12. Remove the slicing/shredding disc and ejector
disc from the processing bowl.
Note: The blades on the stainless steel
slicing/shredding disc are only for use with the
continuous flow attachment.
Disassembly
When processing is completed and the
processing blade or slicing/shredding disc has
been removed, remove the processing bowl. To
do this simply turn the processing bowl to the
right in a clockwise direction, until the bowl is
unlocked (15).
Using your Sunbeam Oskar 400 (cont).
(13)
(14)
(15)
Large
locking tab
Horizontal
slot