EasyManua.ls Logo

Sunbeam EM7100 - Inserting a Capsule Adaptor

Sunbeam EM7100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Inserting a capsule adaptor
1.ChooseaCapsuleadaptorbasewhich
matchesyourcapsulebrand,
eg.Black=Nespresso.
Insertthebaseintothegrouphandle.
Ensurethebayonetsontheundersideof
thebase,areinsertedintotheslotsonthe
handle.Ensuretheadaptorbasesitsflush
inthegrouphandle.
3.Insertyourcorrespondingcoffeecapsuleinto
Capsulebase.Thentakecapsuletopand
placeontop.Usingboththumbs,pressdown
oncapsuleadaptortopuntilitpiercesthe
capsule.The capsule must be pierced prior to
inserting into the espresso machine.
2.Whenthebaseisflushinthegroup
handle,turncapsuleadaptorbaseabout
30°soitdoesnotfallout.Thiswillmake
iteasierwhenyou'reknockingouttheused
capsules,afteryou'vemadeyourcoffee.
4.Yourcapsulehandleisnowreadytobe
insertedintothemachinegrouphandle.
Figure1 Figure2
Figure3
Figure4
IMPORTANT: •Thecapsuleadaptorbaseandtopmustbethesamecolour.Ifyouusedifferent
coloursthemachinewillnotwork.
•Itisimportantthetopspike/spikespuncturethesurfaceofthecapsule,
otherwisetherewillbenocoffeepour.
Note:Thespikesintheadaptorsaresharp.
*Capsuletrademarksareownedbythirdparties&arenotrelatedtoSunbeam.
(Seepage26forfullTrademarksDisclaimer)

Related product manuals