11
Heading
5. To lock the processor cover into position,
ready for use, turn the cover to the right.
The holding lip should be flush with the
top of the bowl handle, see Figure 5.
Important: If the processing bowl and
cover are not correctly assembled, the
MultiProcessor will not function.
Using your MultiProcessor
1. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
2. Using the control dial, select the desired
processing speed.
The Pulse function remains on as long as
the Pulse button is pressed down.
The variable speed settings will provide
continuous processing until the control dial
is returned to the ‘0’ position.
Further ingredients can also be added
whilst processing by pouring through the
feed tube once the food pusher has been
removed.
3. After you have completed processing, turn
the control dial to the ‘0’ position.
Note: For maximum control when using your
food processor, before turning on your food
processor load the feed tube. Always use the
food pusher for more evenly processed foods
and never use your fingers.
Important: When mixing a heavy load, ie.
‘1.5kg Dough’ do not operate food processor
for more than 1 minute at a time.
LOCKED
Using your Sunbeam MultiProcessor continued
LC6200
Pictured
Fig 5
To Next Page
Loading...
Need help?
General
