24
Care and cleaning
When you have finished processing, unplug
your MultiProcessor from the power outlet.
All accessories and processor tools can be
washed in hot soapy water except for the
processor body. Clean the processor body by
wiping with a damp cloth.
Warning: Care must be taken when handling
the metal blades as these items are extremely
sharp.
Note: Always unplug the MultiProcessor
before cleaning.
Dishwasher Use
All plastic components deteriorate through
the prolonged use of a dishwasher for
cleaning.
However all parts of your MultiProcessor are
tolerant to dishwasher use, excluding the
processor body.
If using the dishwasher place parts only on
the top rack of your dishwasher.
Note: We recommend washing all parts of the
MultiProcessor in hot soapy water except for
the processor body.
Cleaning your Blender
Note: Only for the MultiProcessor Plus
(LC6900).
Quick cleaning method.
Half fill the blender with warm water and a
small amount of detergent. Press the PULSE
button for a few seconds. Then remove the
jug and rinse it under running water.
For thorough cleaning.
Unscrew the blade system from the jug by
turning anti-clockwise. Remove the silicone
rubber seal from the blade assembly. Wash
the lid, jug, silicone rubber seal and the
blade assembly in warm soapy water.
Caution:
Take care when cleaning the blades,
as they are extremely sharp.
To Next Page
Loading...
Need help?
General
