User's Manual
The SLAVE output from one
ATMOS subwoofer can be con-
nected to the SLAVE input of a
second ATMOS subwoofer. The
second subwoofer will then re-
ceive the optimum audio signals
from the rst.
There is no need to adjust
the controls of the second
subwoofer, as the audio is con-
trolled by the controls and EQ
setting of the rst. The second
subwoofer does not require
any connections to its line-level
inputs.
Before the EQ procedure,
make sure that both ATMOS
subwoofers are connected
together as shown. The micro-
phone should be connected
to the rst subwoofer. The
automatic EQ procedure will
take into account the effect of
both subwoofers as they play in
the room.
Using the slave input and output
To Next Page