System Configurations
The
following
pages show some typical
connections that you might make
in
your
installation. They show how the inputs
and outputs
of
the Sunfire Subwoofer
are connected to your preamplifier or
receiver.
Connections
to
a preamplifier's
subwoofer
output
If your processor or receiver has
a subwoofer output (Sub/LFE), it
should
be connected to the sub-
woofer's Left input as shown. This
is the simplest
and recommended
connection.
If
you have a Home Theater pro-
cessor
or
receiver, it
probably
has
an
independent subwoofer
volume
and crossover
control. If
so, you
should set the subwoofer's
volume
control
to
0
dB, set the crossover
to Bypass, and use the processor's
subwoofer level
and frequency con-
trols for adjustments.
+ -
TO
FRONT SPEAKERS
SUJ?fire
User's
Manual
---------------------.....--11
To Next Page
Loading...
