SunFounder GalaxyRVR Kit for Arduino, Release 1.0
• Choose the Blank preset, select either Dual or Single Stick according to your preference. Give
your new controller a name and click Confirm.
• You are now inside the controller. Click the + icon in the D section, then select Slider from the
popup menu.
• This Slider widget is designed to control the tilt mechanism. As we learned in the previous lesson,
its range is from 0 to 140. Therefore, we will set these as the minimum and maximum values for
our Slider widget.
88 Chapter 3. Course Mode
To Next Page
Loading...