Sungrow EMS300CP - Page 33

25
Parameter
Quick
Slow Custom
Scale Factor 0.01 0.10
Set by users
Integral Coefficient
0.98 0.01
Differential
Coefficient
0.00 0.00 0.00
step 3 Click Save to save the configuration.
- - End
1.7.11.3 Energy Storage Reactive Power Parameters
step 1 Click Control Method→PID Control→Energy Storage Reactive Power Parameters to
enter the corresponding interface.
step 2 Click
in Preset Parameters to set the status of the Preset Parameters.
The preset parameters are divided into: quick, slow and custom, and the default values are
as follows.
Parameter
Quick
Slow Custom
Scale Factor 0.01 0.10
Set by users
Integral Coefficient
0.98 0.01
Differential
Coefficient
0.00 0.00 0.00
step 3 Click Save to save the configuration.
- - End
1.7.11.4 PV Reactive Power Parameters
step 1 Click Control Method→PID Control→PV Reactive Power Parameters to enter the
corresponding interface.
step 2 Click
in Preset Parameters to set the status of the Preset Parameters.
The preset parameters are divided into: quick, slow and custom, and the default values are
as follows.
Parameter
Quick
Slow Custom
Scale Factor 0.01 0.10
Set by users
Integral Coefficient
0.98 0.01
Differential
Coefficient
0.00 0.00 0.00
step 3 Click Save to save the configuration.
- - End
User Manual 1 Web Login