Sungrow EMS300CP - License; About

33
• If it is set to Disable, the hospot is turned off.
WLAN connection shall be established again if the WLAN password is modified.
step 3 Click Save to save the configuration.
- - End
1.9.7.4 DI
step 1 Click SystemPort Parameter DI to enter the corresponding interface.
step 2 Set the DI status to NO or NC according to actual conditions.
step 3 Click
on the right to save the settings.
- - End
1.9.7.5 DO
step 1 Click SystemPort Parameter DO to enter the corresponding interface.
step 2 Set the DO status to NO or NC according to actual conditions.
step 3 Click
on the right to save the settings.
- - End
1.9.8 License
On this interface users can view license information and import license files.
step 1 Click System→license to view the basic information and license status of the product.
step 2 Click Select File to import the license file. Please contact SUNGROW customer service and
provide the contract number to apply for the license file.
Click Clear to clear the license file.
- - End
1.10 About
Click About to enter the corresponding interface. In this interface, users can view the
controller firmware information.
The user manual can be downloaded by scanning the QR code of the interface using your
mobile phone.
User Manual 1 Web Login