29
6 Electrical Installation
6.1 Safety Instructions
6.1.1 General Rules
High voltage! Electrical hazards!
Do not touch the live components of the device.
Make sure the MV Station are voltage-free before installation.
Never put flammable materials in the vicinity of the MV Station.
If a ground fault occurs in the PV system, some parts that were voltage-free before may
contain lethal voltage. Accidental touch may cause serious damage. Make sure there is
no system ground fault before operation and take proper protective measures.
Observe all the country-specific standards and regulations.
Connect the MV Station to public grid only after receiving authorization from the local
network operator.
Only professional electricians can perform the operations described in this chapter.
Observe all the instructions to connect the wires.
Disconnect all the switches before electrical connection.
To Next Page
Loading...
