Sungrow MVS6250 User Manual

1
1 About This Manual
1.1 Validity
This manual is intended for the following product

MVS6250

MVS6800
Hereinafter it will be referred to as " MV Station" unless otherwise specified.
1.2 Target Group
This manual is for technical personnel who are responsible for the transport, installation and
other operations on the MV Station.
Only qualified personnel can perform the installation. Qualified personnel are:

Equipped with certain electrical wiring and mechanical knowledge and familiar with
electrical and mechanical principle diagram

Familiar with the construction and working principle of the PV grid-connected power
generation system; and familiar with the construction and working principle of the MV
Station upstream and downstream equipment

Trained especially in the installation of electrical devices

Capable of coping with the dangerous and emergency situations during the installation
and commissioning

Familiar with the country/regional standards and specifications

Familiar with this manual
1.3 Symbols Explanation
This manual contains important safety and operational instructions that must be accurately
understood and respected during the installation and maintenance of the equipment.
To ensure the optimum use of this manual, note the following explanations of the symbols
used.

Sungrow MVS6250 Specifications

General

Rated Power	6250 W
Max. DC Input Power	7500 W
Max. AC Output Power	6250 W
Efficiency	98.4%
Protection Level	IP65