16
Utility knife Marker Rubber mallet Measuring tape
Level Hammer drill (φ10) Torque screwdriver
(ST6.3,M4,M5,M6)
Torque wrench
(16mm、17mm、
35mm)
Hydraulic plier Heat gun Allen wrench (M5) MC4 Wrench
Tube terminal
crimping tool
Wire stripper MC4 terminal crimp-
ing tool(4–6 mm
2
)
Electric screwdriver
(ST6.3,M4,M5,M6)
4.6 PE Cable Preparation
Additional grounding cable is prepared by customers.
table 4-2 Cable requirements
Type Specification
Complying with 1000V and 105℃ standard
4–6 mm
2
Prepare the cable and OT/DT terminal.
4 Mounting User Manual
To Next Page
Loading...
