25
Improper handling may cause personal injury!
• Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such
as anti-impact shoes and gloves.
• Attention must be paid to the center of gravity of the inverter to avoid tilting dur-
ing handling.
• Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
• Move the inverter by holding the handles on it. Do not move the inverter by
holding the terminals.
4.5 Installing Mounting-bracket
The inverter can be installed on a bracket, a wall, and a pole by means of mounting-bracket.
Dimensions of the assembled mounting-bracket are as follows.
figure 4-1 Dimensions of Mounting-bracket
Reserve enough space when installing the mounting-bracket to meet the installation space
requirements of the inverter.
User Manual 4 Mechanical Mounting
To Next Page
