87
figure 7-14 PID Setting
table 7-4 PID Parameter Description
Parameter
Description
PID Recovery
Set enabling/disabling of the PID night recovery function. PID night
recovery function operates between 22:00 pm and 5:00 am by
default.
Anti-PID
The Anti-PID function is performed during the day when connected
to the grid.
Full-Day PID
Suppression
The function is turned on and the PID is adjusted throughout the
day.
AFCI Parameters(Optional)
Tap Settings→Operation Parameters→AFCI Parameters to enter the corresponding
screen, on which you can set "AFCI Parameters".
figure 7-15 AFCI Setting
7.10.3 Power Regulation Parameters
Active Power Regulation
Tap Settings→Power Regulation Parameters→Active Power Regulation to enter the
screen, as shown in the following figure.
User Manual 7 iSolarCloud App
To Next Page
Loading...
