77
figure 6-2 Plant Creation Settings
Parameter
Name
Description
Plant name The name of the plant.
Plant type The type of the plant, which should be set corresponding to the actual
plant type.
Installed power The installed power of the plant.
Country/Region The country/region where the plant is located.
Time zone The time zone where the plant is located, which can be filled through
automatic positioning and manual input.
Plant address
The location of the plant, which can be filled in two ways:
• Manually: Manually enter the plant location in the input box.
• Automatically: Tap
to automatically obtain the current location
or search for the location of the plant, and then tap Confirm.
User Manual 6 Commissioning
To Next Page
Loading...
